Racing Parts & Services

Parramatta-Racing-Van-605

Modified Engines: Workshop booked until the 15th October 2017 for full engines, but we do have time for all cylinder/case porting, machining and carbys.

Customers who have called recently are booked in.

For highly modified engines, please allow a longer time for assembly as engine  part treatments such as cryogen and ceramics take longer to get done. We need normally 3 to 4 weeks for these engines.

Parramatta Racing Engines:
Australia-USA-Europe

VHM/EHR products are easy to use, good quality parts that make a difference. HGS pipes are at the top of the ladder, and VHM products are well made. We can supply the parts and help you with fine tuning so you can race at a higher level.

We send parts overnight. Payment can be made by Credit Card, Cash, or Cheque. Information is best sent by email, but please call if it's urgent.

Jetting changes for climate changes can be obtained if you give us your temp. RH. and height. They are minor modifications but are important at national racing level. Figures listed are at 25-30 degrees.

Please call first if you are sending engines. We have preferred transporters.

ENGINE  DYNOMETER  and  BIKE DYNOMETER.

We have 2 dynos for testing.  The bike dyno requires a slick  race type tyre to be fitted before testing can be done.    The Engine Dyno   requires the engine only , to be bolted in place.  The engine dyno is more precise and gives a true power reading that can be compared to the manufacturers specifications.   We test the 50cc  auto clutch type engines only on the engine dyno, as this is much more precise . Dyno test graphs are the property of the engine/bike owner , and cannot be printed or viewed by others.  All fitting and testing costs are charged at $88 per hour .


BELGIUM VH Exhausts / 2 stroke (VHE) 50cc to 250cc

The mid range power of the Belgium made exhaust is very strong, specially designed for sand tracks and general mx tracks.  After fitting this exhaust its common to reduce the rear sprocket size 1-2 teeth  (less teeth) as the engine  power increases and pulls the faster gearing easy, and produces faster lap times.

VH Belgium Exhausts - 2017 has seen the introduction of these sought after exhausts in Australia finally. The Belgium exhaust low volume producer VH racing, makes each pipe exactly the same, and specialises in extra grunt bottom end power, while also still has very good mid and top end. Motocross, Enduro and flat trackers are enjoying this type of power curve. There is no other pipe we have tested that has this smooth ,quiet , type of performance. We have some stock engines, with just the VH pipes/silencers fitted and jetting changes done, and the riders are winning at top level race meetings, MX and Flat track. The difference, is very noticeable. Stock is slowly arriving.
Note, the new Kawasaki KX85 VH pipe is in stock now as well as most KTM 2 strokes.

 

KTM SX50 2009-2017

HGS EXHAUST SYSTEM $475
VFORCE REED VALVE $265
VFORCE REED VALVE, WITH MODS $295
VFORCE REED VALVE WITH NEW RUBBER INTAKE BOOT (better flow, matches carby size) $310
CYLINDER HEAD (NEW) MACHINED $395
(YOUR OWN HEAD MACHINED) $175
CYLINDER PORTING $245
CRANKCASES STUFFING/MATCHING $295
CRANKSHAFT CERAMIC BEARINGS $240
CLUTCH SPEED TACHO $66

 

KTM SX65 2009-2017

VORTEX Ignition: VORTEX Ignition with our best ignition map installed to suit the HGS or VH exhaust
$695
VORTEX Ignition: Send YOUR vortex to have our map installed
$175
VH SPECIAL EXHAUST SYSTEM On Special: Was $525 $455
HGS EXHAUST SYSTEM $475
SCALVINI EXHAUST SYSTEM $595
VFORCE REED VALVE  $265
REED VALVE SPACER $45
VFORCE REED VALVE MODIFIED $325
VHM CYLINDER HEAD ASSEMBLY (with adjuster and base) $595
VHM 12 degree flat top piston $130
POWERVALVE EHR/European $165
VHM POWER VALVE ADJUSTER  $155
VHM POWER VALVE ADJUSTER BASE  $155
Machine your own cylinder head $175
VHM EXHAUST FLANGE $55
Modified carby(yours)  $365
New ktm modified- carby  $725
Carby jet kit $75
Cylinder porting $245
CRANKCASE STUFFING/MATCHING $295
CRANKSHAFT CERAMIC BEARINGS $260
CRANKSHAFT VHM HIGH INERTIA $1,050
CRANKSHAFT- KTM- HIGH RPM  $1,250
HINSON CLUTCH BASKET $385
FORK LEG EXTENTIONS $545
Swing arm extentions-weld on- 45mm 2016 onwards $345
European swing arm (anodised black) MX and flat track available $1,295
Swingarm with extentions welded on (Exchange) $1,755

 

KTM SX85/ Husky 2013-2018

2018 HGS and VHM heads and 12 deg pistons in stock.
2018 SX85/TC85 High Inertia Crankshaft in stock, now, from VHM.

VORTEX Ignition: VORTEX Ignition with our best ignition map installed to suit the HGS or VH exhaust
$695
VORTEX Ignition: Send YOUR vortex to have our map installed
$175
VH SPECIAL EXHAUST SYSTEMOn Special: Was $525 $455
HGS EXHAUST SYSTEM $475
VFORCE REED VALVE $265
REED VALVE SPACER $45
VFORCE REED VALVE MODIFIED $295
VHM CYLINDER HEAD ASSEMBLY $345
Machine your own cylinder head $175
vhm 12 DEG PISTON $140
Modified carby(yours) $365
New ktm modified- carby  $725
Carby jet kit $175
Cylinder porting $245
CRANKCASE STUFFING/MATCHING $295
CRANKSHAFT CERAMIC BEARINGS $260
CRANKSHAFT VHM HIGH INERTIA - 2013 to 2017 no longer available $1,050
CRANKSHAFT- KTM- HIGH RPM with light polished conrod - 2013 to 2018 available $1,250
HINSON CLUTCH BASKET $385
FORK LEG EXTENTIONS $545
Swing arm extentions-weld on- 45mm 2016 onwards $345
2018 sx85 high inertia ktm crankshaft (modified by VHM) $1,295
2018 sx85 high inertia ktm crankshaft modified with light polished conrod $1,755

 

KTM SX125 / Husky 2009-2017

VORTEX Ignition: VORTEX Ignition with our best ignition map installed to suit the HGS or VH exhaust
$695
VORTEX Ignition: Send YOUR vortex to have our map installed
$175
VH SPECIAL EXHAUST SYSTEMOn Special: Was $575 $495
HGS EXHAUST SYSTEM $550
VHM CYLINDER HEAD ASSEMBLY $370
vhm 12 DEG PISTON $160
Vertex 12 degree piston $185
Vertex Racing piston $225
Cylinder porting $245
Carby modified/bored $365
Powervalve titanium friction coating- levers & rollers $195
CRANKCASE STUFFING/MATCHING $295
CRANKSHAFT CERAMIC BEARINGS $260
CRANKSHAFT VHM HIGH INERTIA $1,250
CRANKSHAFT- KTM- HIGH RPM  $1,255
HINSON CLUTCH BASKET $385
Carby Jet Kit 2016 & 2017 $175
2017 VForce Reed valve $265

 

KTM SX250/Husky

VH SPECIAL EXHAUST SYSTEMOn Special: Was $675 $585
HGS EXHAUST SYSTEM $595
VHM CYLINDER HEAD ASSEMBLY $455
Vertex Racing piston $235
Cylinder porting $245
CRANKCASE STUFFING/MATCHING $295
Jetting Kit 2013-2016 $75
VForce reed Valve 2013-2016 $265
Carby modified/ bored $365
Carby Jet Kit 2016 & 2017 $175
2017 VForce Reed valve $265

 

KAWASAKI KX 65

VH exhaust system $525
VHM cylinder head $295
Vforce reed valve $265
Modified Vforce reed valve $295
Ceramic bearings crankshaft $240
Carby boring and mods $365
26mm Race Mikuni carby $755
Machine cylinder and stck head and add 2 extra boost ports ( for mx racing ) $455
Crankcase stuffing/ matching $295
Hinson clutch basket $385

 

KAWASAKI KX85

Powerband linkage (blue) MX $395
VH Exhaust system $525
VHM cylinder head $345
Vforce reed valve $265
Mod v force reed valve $295
Carby boring and mods $365
Cylinder porting/ machine intake $355
Ceramic crankshaft bearings $260
Special conrod ( lighter) $355
Conrod fitting / balance $132
Crankcase stuffing / matching $295
Hinson Clutch Basket $385
Carby Jet Kit $175
Woosner Single Ring Piston $145

Powerband linkage  (blue)  MX

$395

 

Suzuki RM85

Powerband Linkage MX $335
Vforce reed valve $265
Modified Vforce reed valve $295
VH Exhaust system $525
VHM cylinder head $345
28mm New carby $495
Ceramic bearings - crankshaft $260

 

COBRA 50 Senior

Clutch adjusting Tacho $66
HGS exhaust system $495
Vforce reed valve $265
Modified Vforce reed valve $295
Cylinder porting $245
Crankcase stuffing/ matching $295
Ceramic crank bearings $240

 

COBRA 65cc

HGS Exhaust system $525
Cylinder porting $245
Crankcase stuffing $295
Vforce reed valve $265
Modified Vforce reed valve $295
Ceramic crank bearings $260

 

YAMAHA YZ85

Scalvini Exhaust System $655
VH Exhaust system $525
HGS Exhaust system $525
Vforce reed valve $265
Modified vforce reed valve $295
VHM cylinder head $345
Cylinder porting $245
Crankcase stuffing $295
Crankshaft ceramic bearings $260
Carby jet kit $155
Carby bore and mods $365
Hinson Clutch $1,265

 

YAMAHA YZ125

VH Exhaust system $575
HGS Exhaust system $575
Scalvini Exhaust system $675
VHM cylinder head $380
Vforce reed valve $265
Modified vforce reed valve $295
Cylinder porting $245
Power valve mods $65
Crankcase stuffing $295
Ceramic crank bearings $260
New 38mm Kehein Air striker Carby $594

 

YAMAHA YZ250

VH SPECIAL EXHAUST SYSTEM $675
HGS EXHAUST SYSTEM  $675
VHM CYLINDER HEAD ASSEMBLY $455
Vertex Racing piston $235
Cylinder porting $245
CRANKCASE STUFFING/MATCHING  $295
Jetting Kit 2013-2016  $75
VForce reed Valve 2013-2016  $265
Modified Vforec reed valve  $295
Carby modified/ bored  $365

 

Four Stroke Exhausts

HGS and VH Exhausts - 250cc 4 stroke USA spec Exhausts- stainless steel, carbon fibre silencer end cone, super light weight and great power gains. Note, not just for show, you will feel the power!

KXf 250- sxf250/Huisky -RMZ250-YZf250 $1,090
CRF 250 twin silencers annodised RED $1,155
450cc. Not in stock. Can be ordered in. Enquire

 

Other parts

VHM crankshafts- sx65 sx85 sx125 Enquire
VHM special pistons sx65 sx85 sx125 Enquire
Vertex coated pistons. Single ring race type. Enquire
air filters, Hinson clutch baskets, cluth kits, silencer wool. Enquire
Vforce reed petal kits, sprockets and chains, spark plugs. Enquire
Ignitions box,s Engine gasket kits, oil seals, water pump gears, powervalve rubbers. Enquire
Power valves, VHM special cylinder head inserts, lighter conrods/ polished and treated. Enquire

 

Other workshop services

Complete 2 stroke engine modifications and rebuilds . Enquire
2 stroke and 4 stroke crankshaft pressing / trueing and balance modifications. Enquire
All 2 stroke OE cyl head milling and machine work. Enquire
Crankcase stuffing and crankshaft shrouds fitted. Enquire
Carby boring, oval and round bores, slide machining and slide mods. Enquire

 

Back To Top

Parramatta Racing Dealers

thumb_aussie_moto_engineering_2

Aussie Moto Engineering
Muchea, Western Australia, 6501
Ph:  0427 947 137

VHE-Injection

SPECIAL HAND-MADE EXHAUSTS
FROM BELGIUM- HIGH POWER GAINS

Our Highlight Reel

Tye-Jones

National Champion MX rider Tye Jones In action.

Sidebar-04-280

National Champions- Wilson Todd, Caleb Grothues and Bailey Malkiewicz.

NL_worldJR_gueugnon072-400

Wilson Todd, France World motocross championships.

NL_worldJR_gueugnon015-261

Wilson Todd World Champion number 3 - riding for the EHR team in France.

Zac-Watson

Zac Watson in action, Australian MX champion 2016

Kawasaki-National-Champ-Brad-West

KAWASAKI National Champion MX rider Brad West.

Featured Parts

VHE-Injection

SPECIAL HAND-MADE EXHAUSTS FROM BELGIUM- HIGH POWER GAINS

Paul-Baerickes-MPE

 

image

VHM_Part

Sidebar-02-280

Sidebar-03-280

 European-HMX-sx65-30mm-longer

European HMX sx65 30mm longer swingarm (super strong billet cnc machined)

 SX65-2016-2019-Swing-Arm-Extensions

2016-2019 SX65 Weld On Extensions for Stock Swing Arm

 

Special Thanks To ...

David Griffiths (Griffo). Machining, engine building, designing and mods.

Alan Todd, Wilson Todd and Nathan Ramm for hours spent on testing.

Eddy of EHR for testing and development.

Darren Todd of DTEC. Dyno development and electronics for Racing Engines.

Peter Morris of Maxwill Race Engines. Engine modifiations.

Simon Sherriff of Flow Force Performance. Dyno tuning and track testing.

Heikki van den Berg of VHM. Dyno testing and designing.